Product classification
  • Naked-wrap Tobacco Film APA
  • Naked-wrap Tobacco Film APA

    APA

    APA is a coated film with BOPP as the substrate, which is coated on both sides with acrylic. It exhibits outstanding adaptability on all packaging machines.

    • ¥0.00
      ¥0.00
Product Description

APA

APA is a coated film with BOPP as the substrate, which is coated on both sides with acrylic. It exhibits outstanding adaptability on all packaging machines.


Key Performance Characteristics


  • Excellent transparency

  • Good aroma barrier (retention) performance

  • Wide heat sealing temperature range

  • Good printability on both sides

  • High heat sealing strength with a low sealing initiation temperature

  • Superior compatibility with packaging machines

  • Ideal for water-based ink printing




Typical Uses


  • Adhesive lamination

    APA/ink/adhesive/PE or CPP

    APA/ink/adhesive/ APA

    APA/ink/adhesive/ HPA, BPA, MPA, MWA

  • Stand-up packaging: Unprinted APA, Printing//AP



Thickness


- APA21 model - 21 microns

- APA25 model - 25 microns

- APA30 model - 30 microns




Important Consideration


  • Suitable for single layer packaging of tobacco and dessert

  • While in lamination, APA could be the inside & outside base

  • Good printing properties, for surface printing and inside printing

  • Adhesive is needed on Acrylic coated side for co-extrusion lamination




Technical Data


propertiesTest ConditionUnitAPA21APA25APA30
ThicknessISO4593micron212530
Shrinkage RateASTM D 4321㎡/kg51.843.536.9
Unit WeightASTM D 4321g/㎡19.32327.1
Tensile StrengthMDISO 527Mpa130130130
TD250250250
Elongation at BreakMDISO 527%180180180
TD656565

OTR 23℃,0%RH

ASTM D 3985cc/㎡.24hr
1000860770

WVTR 38℃, 90%RH

ASTM F 1249
g/㎡.24hr

6.66.05.1
Crimp Seal Strength(Acrylic/Acrylic)127℃,1.4bars, 0.75 secondASTM F 88N/15mm3.03.03.0

Sealing Initiation Temperatur

ASTM F 88818181
Gloss(45℃)ASTM D 2457%909090
Thermal Shrinkage RateMDISO 11501
120℃,2min
%2.02.02.0
TD1.01.01.0
C.O.FASTM D 1894/0.25



Attention: 


  • Do not touch the film with bare hands.

  • The best processing temperature: 10℃---30℃

  • Keep the film surface clean and free of contaminants.

  • Maintain a well-ventilated and dry storage environment.



Announcement:


The information relating to the use of the products is given for information purposes only. No guarantee or warranty is provided that the product is adapted to the client'specific use. The client should perform his own tests to determine the suitability for a particular purpose.The final choice of use of a product remains the sole responsibility of the client.