Product classification
  • Anti-fog and Easy-to-Remove Coated Film REA33
  • Anti-fog and Easy-to-Remove Coated Film REA33

    BOPET,coated on one side with anti-fog,heat sealing and low temperature resistance coating film. Providing excellent heat sealing,anti-fog and low temperature resistance properties.The heat sealing strength can be adjusted according to customer's requirements so as to achieve the effect of easy-lift. Product can be directly contact with food,and it is belong to the same material recyclable environmental product.


    • ¥0.00
      ¥0.00
Product Description

BOPET,coated on one side with anti-fog,heat sealing and low temperature resistance coating film. Providing excellent heat sealing,anti-fog and low temperature resistance properties.The heat sealing strength can be adjusted according to customer's requirements so as to achieve the effect of easy-lift. Product can be directly contact with food,and it is belong to the same material recyclable environmental product.



Key Performance Characteristics


  • Excellent heat sealing strength on PET box

  • Excellent low-temperature resistance

  • Food grade coating

  • Superior anti fog function   

  • Good clarity 

  • Recyclable environmental friendly with no chlorine




Product Application


Single used or combined with aluminum foil laminated and printed and then heat-sealed with PET box. Suitable for fresh,fruits and vegeta-bles,seafood,dairy products,and cosmetics etc.





Technical Data


Properties Test ConditionUnitREA23
Average thicknessISO 4593μm33
Unit  weightASTM D 4321g/㎡45.0
Tensile strengthMDISO 527Mpa198
TD199
Elongation at breakMDISO 527%

154

TD98
Heat sealing strengthfilm/film

ASTM F 88
N/15mm6.67
film/PET8.15
Anti-fog

Cold Anti-fog(3℃

/

d30
Heat Anti-fog(90℃)s5
Low temperature resistanceR.C.(3℃)/D30
F.C. (-20℃)D7
C.O.F Coated side/Coated sideISO 8295/0.65/0.65
HazeASTM D 1003%2.92
Gloss (45°)ASTM D 2457%85
Surface TensionISO 8296Dynes/cm50


Attention: 

  • The coating used in theproduct is coated by water-based latex,which can't be in direct contact with high temperature (>75℃) for a long time.

  • The PET box material used by different manufacturers may be different, so it is related to the difference in the heat sealing strength of coated film. The client should perform his own test and confirm the use.

Prev: None
Next: None